Activecare medical medalist Manuel du propriétaire télécharger pdf (Page 12)

SEAT HEIGHT

The height of seat can be adjusted to three positions.

Remove the seat by pulling the bar on the bottom rear of

the seat’s frame. Doing so will release the seat and allow

you to tip the seat forward and then lift up to remove it

from the wheelchair’s base.

Using the included Allen wrench, loosen the bolts on the

rears of all four seat posts.

Remove the metal pins located on the sides of all four seat

posts.

Raise or lower the seat crossbars to the desired height.

Reinsert the metal pins so that they go completely through

the seat posts and the crossbar. Retighten the four Allen

bolts on the rears of the seat posts.

Warning! Only use the Medalist 450 with all four seat posts seat at the same height. Failure to

do so may result in the chair tipping over, causing serious injury.

12 Medalist 450 Owners Manual

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Pas de commentaire

Activecare medical medalist Manuel du propriétaire Page 12